Kenwood Mobile UHF/VHF & HT Radio
The advanced Kenwood TM-D710GA follows in the proud tradition of the popular TM-D710A . It adds an integrated GPS built right into the head. You will have a full 50/10/5 watts on both VHF and UHF. Key features include: internal clock for APRS® (Automatic Packet/position Reporting System) time and date stamp, APRS sort function, APRS filter function, APRS QSY function, APRS decay algorithm, APRS, proportional pathing, APRS voice alert, EchoLink ready, NOAA weather, 1000 memories and a sound card interface is built in. Versatile message with 100 messages (up to 67 characters each) is supported. There is also a NMEA 0183 GPS I/O port. And it can be employed as part of Kenwood’s Skycommand System II+ when used with the TS-2000 series. The screen may be set for orange or green. There is a clock/date function.
The advanced Kenwood TM-V71A dual bander provides sophisticated, high-powered performance on 2 meters and 440 MHz. Power levels are 5/10/50 watts on both bands. The large radio display clearly conveys the status of the radio and can be set to green or amber. The radio’s controls are very logical and feature separate volume/squelch for bands A and B. This transceiver allows you to change the orientation of the front panel. Depending on where/how you installed the transceiver you may wish to flip the front panel upside-down for easier operation. 1000 Memories can be alpha tagged up to six characters. Other features include: scanning, weather alert, password, dual receive on same band and cross-band operation. This dual bander has ten dedicated EchoLink® memory channels as well EchoLink sysop-mode operation. The rear panel has dual audio outputs and an SO-239 [UHF type] antenna jack
The Kenwood TM-281A is a 2 meter FM mobile transceiver providing a big 65 watts of power. You get 200 multi-parameter memory channels (or 100 when used with names). This radio is capable of displaying up to 6 large alphanumeric characters. And the vivid amber display may be adjusted to 32 levels of brightness. Also, the front panel and microphone keypads are both illuminated for ease of use. Many functions can be tailored to your preference via the easy-to-use menu system. Built-in continuous CTCSS and DCS rejects unwanted signals. This radio has NOAA weather channels built-in with automatic alert tone (1050 Hz) detection. Multiple scan methods are available. Other functions include 1750 Tone Burst, power-on message, reverse function, key lock, channel display mode, busy channel lock-out and direct frequency entry. The menu allows for easy control and selection of various functions. The 281A is Narrow band FM ready. The TM-281A is tough enough for off-road assignments and meets MIL-STD 810C, D, E, F and G environmental standards for vibration and shock. Compact 6.3 x 1.69 x 4.69 inches (160x43x126mm).
144/220/430 MHz TRIBANDER. Triband Amateur radio packed with convenient features and the advantage of a digital transceiver with D-STAR, and APRS support. Featuring a color transflective TFT display that offers excellent visibility during the day or at night. Built-in GPS and Bluetooth support, as well as Micro USB and microSD/ SDHC. This radio is ready to harness the exciting developments in radio communications.
The Kenwood TH-D72A Data Communicator is equipped with a built-in TNC (1200/9600) and provides APRS® (Automatic Packet/Position Reporting System) and there is an integrated GPS! Transmit coverage is 144-148 and 430-450 MHz. Receive coverage is: Band A 136-174 & 410-470 MHz, Band B 118-174 & 430-450 MHz. And the TH-D72A can employed as part of Kenwood’s Skycommand System II+ when used with the TS-2000 series. The TH-D72A also offers EchoLink® memory compatibility and a mini-USB connector for enhanced computer connectivity. Features include: 1000 alpha memory channels, 9 scan modes (VFO, Program, MHz, Memory, Memory Group, Call, Tone, CTCSS, DCS), 42 CTCSS frequencies, 104 DCS (Digital Code Squelch) codes, Cross-tone, Waypoint export, DX cluster tune, Clock (date/time), Band mask, Call channel, Monitor, Auto power-off, MHz mode, Selectable frequency step, Shift, VOX, Auto repeater offset, Automatic simplex checker, and DTMF memory (10 channels, 16 digits). New advanced innovations include: 1200/9600 bps packet TNC, SkyCommand APRS Firmware, Stand-alone Digipeater, Built-in High performance GPS (with KML file support from the free MCP-4A software), GPS logging – memory for up to 5000 points of track data, EchoLink Ready, MIL-STD810 and IP54 weatherproofing, 1200/9600 bps packet communications, Kiss mode, Stand-alone Digipeater and the TH-D72A can even function as an iGate when properly connected! This transceiver is sure to make ham radio operations easier and more fun for all. 2.3 x 5.5 x 1.6 inches 13.1 ounces. The MCP-4A programming software is available as a free download from the Kenwood website
The Kenwood TH-K20A is a rugged 2 meter HT with up to 5.5 watts of power and straight-forward operation. You get 200 memories and multiple scan modes are supported. CTCSS/DCS is included.
Your TH-K20A comes with: KNB-63L Li-ion 1130 mAh, KSC-35S drop-in charger, SMA flexible antenna, belt clip and three Owner’s Manuals (English/French/Spanish).